Compatible with SolarEdge Universal 3 Phase Inverter
Recommended to complete SolarEdge Home Hub 3PH Storage training on SolarEdge EDGE Academy before first installation

Compatible with SolarEdge residential inverters (Home Hub, Genesis & 3 Phase Residential)

Designed for 2 x SolarEdge 82.8kW inverters. 


 Secondary network protection & solar distribution board includes the following: 
- Metal enclosure, 1000(H) x 600(W) x 250(D) mm 
- Powder-coated steel with top and bottom gland plates 
- IP 66 rated for outdoor installation 
- 3 point lockable handle 
- 320A MCCB main switch 
- 2 x 148A MCCB inverter circuit breaker 
- 350A N/O contactor 
- 10A internal GPO 
- Spare 3 phase 10A MCB 
- ABB secondary network protection relay (preprogrammed to utility requirements) 
- Pre-labelled with additional labels included for main switchboard 
- All components pre-wired and checked with 2-step QA process 
- Suitable for a maximum fault current of 10kA 
- For higher fault currents, please call ACSW to discuss 
- Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016 


 Available modifications: 
- ABB network protection relay can be swapped for ComApp MainsPro (+$50) 
- Conversion of AC board to slave equivalent without network protection (-$1000) 
- Installation of test links for on-site injection testing (+$100) 
- Installation of 3P+N AC surge diversion (+$250)
- Installation of General Signalling Device (Queensland only) (+$100)

*Clearance pricing available while stocks last*
Hybrid inverter compatible with SolarEdge Home Battery (non-backup)
Requires SolarEdge optimisers to operate.
Meter and CTs sold separately
Panel level monitoring, Smart Home control and Smart EV Charging features now included as standard.

SE30K-AU00IBNV4
- Requires SolarEdge optimisers to operate
- Wifi capable - antenna sold separately

SE33.3K-AU00IBNV4
- Requires SolarEdge optimisers to operate
- Wifi capable - antenna sold separately

- Requires 2x SESUK-AU00INNN4 Synergy Units to operate as a 50kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 2x SESUK-AU00INNN4 Synergy Units to operate as a 66.6kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 3x SESUK-AU00INNN4 Synergy Units to operate as a 82.8kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 3x SESUK-AU00INNN4 Synergy Units to operate as a 100kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Compatible with SE50K, SE66.6K,  SE82.8K- and SE100K-AU00IBNV4 Synergy Manager units only

Compatible with all current gen SolarEdge, Genesis, Home Hub inverters and 3PH Residential and Commercial Inverters ≤33.33kW
Right angle SMA adaptor required for use with 50-100kW Synergy Inverters

SE-ANT-ZB-WIFI-03
- Wifi antenna kit for SolarEdge SE50K/SE66.6K/SE82.8K/SE100K Synergy inverters

Kit includes
- SolarEdge Wireless Gateway Base Station and Antenna
- Wi-Fi Antenna for SolarEdge SetApp Inverters
SolarEdge Wireless Repeater available to boost range - up to 2 repeaters per Gateway

Kit includes:
- SolarEdge Wireless Repeater and Antenna

Kit includes:
- AP1547A-SG-08-FW1 Home Network Plugin
- AS4034-AN1-1 Home Network Antenna
- Compatible with Home Hub, current model Genesis and 3Ø residential inverter range
- SolarEdge Home Network (ENET) cards not compatible with commercial inverters (SE15K and above).

- Suitable for up to 65A
- Compatible with SolarEdge residential inverters only
- Inverter Home Network plugin required for wireless functionality [HNET-HBNP-01]
- Hardwired RS485 comms also possible
- Optional external antenna [SE-ANT-ENET-HB-01] recommended to boost signal strength.

- Suitable for up to 65A
- Compatible with SolarEdge residential inverters only
- Inverter Home Network plugin required for wireless functionality [HNET-HBNP-01]
- Hardwired RS485 comms also possible
- Optional external antenna [SE-ANT-ENET-HB-01] recommended to boost signal strength.

Compatible with SolarEdge Home Hub inverters
At least one Home Hub inverter required per system for backup functionality
Supports up to 2 additional Genesis or Home Hub inverters in backup
Includes CT for measuring import/export for use with the Home Hub inverters built in energy meter

Alternate SKU: FLD-EURB-YCBL-A-01
Used to parallel 2 or 3 SolarEdge BAT-10K Home Batteries to SolarEdge inverters
Kit includes:
- 1x positive Y-branch connector with MC4s
- 1x negative Y-branch connector with MC4s