AC Board - Single Phase Enphase CK2 IQ Battery & Microinverter
  2. Shop
  3. AC Board - Single Phase Enphase CK2 IQ Battery & Microinverter
Pre-Order

AC Board - Single Phase Enphase CK2 IQ Battery & Microinverter

https://www.acsolarwarehouse.com/web/image/product.template/25783/image_1920?unique=5b828ed

    This combination does not exist.

    Login or Register to view prices and place an order

    Volume pricing will be automatically applied for:

    1+ pallets, 4+ pallets and 10+ pallets

    Contact Us

    Save up to $400 on Enphase battery bundles. Receive a $50 VISA Card for every IQ Battery 5P purchased and a $300 discount on AC Board and Pre-wired IQ System Controller bundles.


    AC Boards with the CK2 built-in for new systems with IQ Battery


    This Enphase Distribution Board comes with everything you need to install a new Enphase system with IQ Battery.  


    The Enphase Communication Kit 2 (CK2) is pre-Installed in the AC Board, which saves you time on-site, avoid wiring issues, and speed up commissioning.


    Our Enphase AC Board with CK2 accommodates the IQ Gateway and all necessary electrical hardware for installing an Enphase system with IQ Batteries. 

    They are fully pre-wired, tested, and customisable to your specific installation needs. They come pre-labeled* along with enough CAN communication cable to run to multiple IQ Batteries.

    *Pre-labeled to meet AS/NZS 5033/4777 requirements, with labels for the main switchboard and battery included.


    These distribution boards can be fully customised to support any number of batteries and are adaptable for both single-phase and three-phase systems.


    AC Board - Enphase CK2 single phase Specs


    • 36 pole Legrand IP65 rated surface mount enclosure (not suitable for direct sunlight)
    • IQ Gateway S Metered + DRM - 80A 1ph Hager main isolator (SBR180)
    • 6A Hager MCB for IQ Gateway supply
    • 2 x 20A 1ph Hager RCBO and IQ Relays for solar circuits
    • 2 x 20A 1ph Hager MCB and IQ Relays for battery circuits
    • Completely pre-wired and tested
    • Pre-labelled to AS/NZS 5033/4777 requirements with labels for main switchboard also included
    • Dimensions (mm) - 622(H) x 340(W) x 161(D)

    Learn more about AC Board


    About the Enphase CK2


    Matthew Lutz, our Enphase Product Specialist, explains in this short video how the CK2 works and what your installation options are.




    The CK2 acts as a communication converter, enabling direct communication between your IQ Gateway (formerly known as Envoy) and the IQ Battery, without the need for a IQ System Controller.


    The CK2 reduces the system costs significantly by removing the need for an IQ System Controller in grid-tied mode where backup is not required by the homeowner. This enables you to install more IQ Batteries for more customers (new or existing) using their systems for daytime charging and nighttime discharging, helping you secure more Enphase projects.


    Learn more about the Enphase Communication Kit 2 on the official Enphase website. 

    Similar Products