DEYE - C&I Inverter and Battery HV 50kW/120 kWh
SKU: GE-F120-2H6
The DEYE - C&I Inverter and Battery HV 50kW/120 kWh (SKU: GE-F120-2H6) is an all-in-one commercial and industrial energy storage cabinet integrating a 50 kW three-phase hybrid inverter, 122.8 kWh high-voltage LiFePO4 battery system, BMS, and EMS into a single outdoor-rated enclosure. Engineered specifically for Australian small-scale C&I applications such as farms, retail shops, and factories, it delivers 50 kW nominal AC output and UPS power alongside 100 kWh usable energy and up to 100 kW maximum PV access power across 4 MPPT trackers. Featuring 5-level extreme safety protection with aerosol fire suppression, black start capability, and flexible DC and AC expansion up to 500 kW / 3600 kWh, the GE-F120-2H6 streamlines commercial deployment while ensuring reliable backup and peak shaving.
Key Features: DEYE - C&I Inverter and Battery HV 50kW/120 kWh
- All-in-One Integrated Cabinet: Combines a 50 kW three-phase hybrid inverter (SUN-50K-SG01HP3-AU-BM4), 122.8 kWh LFP battery bank, BMS, and EMS into one floor-mounted IP55 outdoor enclosure.
- High PV Input & Off-Grid Surge Power: Supports up to 100 kW max PV access power (75 kW max PV input) across 4 MPPT trackers (8 strings total) and delivers 1.5 times rated off-grid peak power for 10 seconds.
- Modular DC & AC Scalability: Expands on the DC side by adding up to four GE-F60 cabinets (50 kW / 360 kWh), and parallels up to 10 groups on the AC side to reach 500 kW / 3600 kWh.
- 5-Level Extreme Fire & Environmental Safety: Equipped with pack-to-system aerosol fire suppression, combustible gas, smoke, and temperature detection, an active exhaust fan, and an integrated fire alarm.
- Power Supply Redundancy & Black Start: Features redundant internal power supply design, off-grid operation, black start support, and up to 200 A continuous AC passthrough from grid to load.
- Long Cycle Life & 10-Year Warranty: Built with 5.12 kWh LFP modules rated for greater than or equal to 6000 cycles (at 25 degrees C, 0.5C/0.5C, 70 percent EOL) and backed by a 10-year manufacturer warranty.
Basic Specs: DEYE - C&I Inverter and Battery HV 50kW/120 kWh
- System Model Designation: GE-F120-2H6 (with SUN-50K-SG01HP3-AU-BM4 Inverter)
- Nominal AC Output / UPS Power: 50,000 W (50 kW)
- AC Output Rated Current: 72.5 A
- AC Output Voltage & Frequency: 230/400 V, 240/415 V (3L/N/PE), 50 Hz (45 to 55 Hz)
- Peak Power (Off-Grid): 1.5 times rated power for 10 seconds
- Max Continuous AC Passthrough: 200 A
- Max PV Access / Input Power: 100,000 W / 75,000 W
- MPPT Voltage Range & Trackers: 150 V to 850 V (1000 V Max), 4 MPPTs (2 strings per MPPT, 36 A per MPPT)
- Battery Chemistry & Configuration: LiFePO4, 122.8 kWh Total Energy / 100 kWh Usable Energy (51.2 V / 5.12 kWh Modules)
- Battery Operating Voltage Range: 500 V to 700 V
- Battery Max Charge / Discharge Current: 100 A
- Max Round-Trip Efficiency (RTE) & Inverter Efficiency: 89 percent Max RTE / 97.60 percent Max Inverter Efficiency
- Communication & Display: WIFI, RS485, CAN, LCD Display
- Ingress Protection & Mounting: IP55, Floor-Mounted
- System Dimensions (W x D x H) & Weight: 1780 x 1056 x 2235 mm, 2090 kg
- Operating Temperature Range: -20 to 55 degrees C (Derating above 43 degrees C)
- Cycle Life & Warranty: greater than or equal to 6000 Cycles (70 percent EOL), 10 Years Warranty
- Certifications & Grid Compliance: AS/NZS 4777.2, CEC, UN38.3, IEC 62619, IEC 62040, IEC/EN 62109-1/-2
What’s Included: DEYE - C&I Inverter and Battery HV 50kW/120 kWh
- 1 x Deye All-in-One C&I Energy Storage Cabinet (Model: GE-F120-2H6)
- Pre-installed 50 kW Three-Phase Hybrid Inverter (SUN-50K-SG01HP3-AU-BM4)
- Pre-installed 122.8 kWh High-Voltage LiFePO4 Battery Racks and BMS
- Integrated Aerosol Fire Suppression, Gas/Smoke/Thermal Sensors, and Active Exhaust System
- Floor-Mounting Hardware and Commissioning Documentation
Why Choose AC Solar Warehouse for DEYE - C&I Inverter and Battery HV 50kW/120 kWh?
When sourcing the DEYE - C&I Inverter and Battery HV 50kW/120 kWh through AC Solar Warehouse, you benefit from industry-leading commercial solar and energy storage expertise, guaranteed authentic equipment, and dedicated technical service. AC Solar Warehouse offers end-to-end support for commercial installers—from pre-sale system design, string sizing, and AS/NZS 4777.2 compliance review to post-commissioning assistance. With stock availability and robust logistics networks, AC Solar Warehouse ensures your commercial energy storage projects are executed efficiently and backed by trusted industry professionals.
Specifications
Ac Solar Warehouse
Label Breakdown
AC Solar Warehouse