Sungrow Batteries Promotion: Buy 11 Sungrow battery modules between 1st of May and 31st of July 2025 and receive 1 free of charge. Learn more - T&C apply.
SKU: SBH200/ 250/300/350/400
Sungrow SBH Battery - 5kWh
Each 5kWh battery module is deFsigned for exceptional reliability and efficiency, seamlessly integrating into both residential and commercial energy systems. The system's flexible configuration supports a minimum of 4 modules and up to a maximum of 8 per stack, depending on the connected inverter.
You can parallel up to 4 stacks, achieving a total storage capacity of 160kWh, providing scalable solutions tailored to your specific energy needs.
With the capability of up to 50A continuous charge and discharge currents, the SBH Series ensures consistent power output, maintaining reliable operation even during peak demand periods. These battery modules offer ample energy reserves to support high-power applications effortlessly.
Ideal for residential backup power or commercial energy management, Sungrow's SBH Series sets the benchmark for reliability, efficiency, and scalability in energy storage.
To install the SBH battery - 5kWh modular unit you need the Sungrow SBH battery - Accessory kit
Specifications Sungrow SBH battery - 5kWh
- Battery Type: Lithium iron phosphate
- Maximum Storage Capacity: 5kWh per module
- Continuous Charging and Discharging: 50A
- Dimensions: 675 x 160 x 350 mm
- Weight: 45 kg
- Warranty: 10 years
Configuration Requirements:
Modules per Stack:
- Minimum: 4 modules
Parallel Stacks:
- Up to four equal stacks can be connected in parallel to a single inverter.
- Requirement: SJR050-04 Combiner is necessary for connecting stacks in parallel.
Accessory Requirements:
- Requires 1 x SBH Accessory Kit per tower (sold separately).
Labelling Compliance Guaranteed
Check out our latest article covering all the information you need about our Labelling Compliance Guarantee.
Check out our Solaredge Pro-plaque label kits and Classic label kits.
Design and Expansion:
The system is stackable and modular, allowing for easy expansion by adding more modules within the specified limits.
Example Configurations:
SH5.0/6.0RS System:
- Stack can have between 4 to 5 modules.
SH8.0/10RS System:
- Stack can have between 4 to 6 modules.
- Stack can have between 4 to 7 modules.
- Stack can have between 4 to 8 modules.
For each of these configurations, ensure the use of the SBH Accessory Kit for each tower and consider the necessity of the SJR050-04 Combiner for parallel connection of up to four stacks to a single inverter.
Check out our Sungrow Label kits: Pro plaque and classic label kits. All these kits are compliance guaranteed - Learn more.