- Winet dongle included
- 1 MPPT
- IP65
- Smart meter ordered separately

- Winet dongle included
- 2 MPPT
- IP65
- Smart meter ordered separately

- Winet dongle included
- 2 MPPT
- IP65
- Smart meter ordered separately

- S100 smart meter included
- Winet dongle included
- Cable cover included
- 3 MPPT
- IP65

- S100 smart meter included
- Winet dongle included
- Cable cover included
- 3 MPPT
- IP65

- DTSU666-20 dual channel smart meter and 2 x 100A CT included
- WiNet dongle included
- Cable cover included
- 2 MPPT
- Compatible with SBR stacks SBR064/096/128/160/192/224
- Compatible with SBH stacks SBH200/250/30

- DTSU666-20 dual channel smart meter and 2 x 100A CT included
- WiNet dongle included
- Cable cover included
- 2 MPPT
- Compatible with SBR stacks SBR064/096/128/160/192/224
- Compatible with SBH stacks SBH200/250/30

- Includes WiNet-S Wi-Fi dongle
- DTSU666-20 consumption meter purchased separately
- 2 MPPT (1/1)
- IP65
- 370mm x 480mm x 195mm, 18kg

- Includes WiNet-S Wi-Fi dongle
- DTSU666-20 consumption meter purchased separately
- 2 MPPT (2/1)
- IP65
- 370mm x 480mm x 195mm, 18kg

- Includes WiNet-S Wi-Fi dongle
- DTSU666-20 consumption meter purchased separately
- 2 MPPT (2/1)
- IP65
- 370mm x 480mm x 195mm, 18kg

- Includes WiNet-S Wi-Fi dongle
- DTSU666-20 consumption meter purchased separately
- 2 MPPT (2/2)
- IP65
- 370mm x 480mm x 195mm, 21kg

- Includes WiNet-S Wi-Fi dongle
- DTSU666-20 consumption meter purchased separately
- 2 MPPT (2/2)
- IP65
- 370mm x 480mm x 195mm, 21kg

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D
• IP66
• Switchgear rated to 100A
• MainsPro Interface Protection Relay, pre-programmed to DNSP settings
• Fault rated to 33.4kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2025, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase includes:
- 1x 63A 1P MCB Main (Grid) Switch
- 1x 63A 1P MCB to wire Backup circuits
- 1x 63A 1P MCB to wire Non-Backup circuits
- 1x 40A 1P MCB to series wire 2x IQ Battery 5P's
- 1x 20A 1P MCB to wire 1x IQ Battery 5P
- 3 x 25A 1P MCB to wire 3x single-phase PV circuits
- 1x 16A* 1P MCB wired to the IQ Gateway
- 1x 6A 2P MCB wired as a System Shutdown (SSD) Switch (substitutes the external SSD that the IQ System Controller comes with)

This kit also comes with 6m of communications cable for Enphase batteries and the Enphase Pro Plaque Label Kit

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D [mm]
• Board Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 160A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

Secondary Network Protection and Solar Distribution board includes:
• Metal Enclosure: 800(H) x 600(W) x 250(D) [mm]
• Enclosure Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 200A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 2 100A Inverter circuit breakers
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100->200)
• Install 3P+N AC surge diversion (+$250)

Suitable for indoor & outdoor installations.
Branded, battery-specific instructions included with your install.
Comprehensive kit – includes all labels for common installation requirements. Shutdown labels – Multi-scenario and product-specific labels with images.
Includes Plaque with all labels required adjacent to the battery, to make the labelling look as professional as the install.
Waterproof safety data sheet – Comes in a magnetic holder to easily attach inside the
MSB. Clear instructions – Guidance on where to place each label for different scenarios.
Engineered in Australia – Designed in-house by our expert engineers.
Great value for money.

Suitable for indoor & outdoor installations.
Branded, battery-specific instructions included with your install.
Comprehensive kit – includes all labels for common installation requirements. Shutdown labels – Multi-scenario and product-specific labels with images.
Includes Plaque with all labels required adjacent to the battery, to make the labelling look as professional as the install.
Waterproof safety data sheet – Comes in a magnetic holder to easily attach inside the MSB.
Clear instructions – Guidance on where to place each label for different scenarios.
Engineered in Australia – Designed in-house by our expert engineers.
Great value for money.

Suitable for indoor & outdoor installations.
Branded, battery-specific instructions included with your install.
Comprehensive kit – includes all labels for common installation requirements.
Shutdown labels – Multi-scenario and product-specific labels with images.
Includes Plaque with all labels required adjacent to the battery, to make the labelling look as professional as the install.
Waterproof safety data sheet – Comes in a magnetic holder to easily attach inside the MSB.
Clear instructions – Guidance on where to place each label for different scenarios.
Engineered in Australia – Designed in-house by our expert engineers.
Great value for money.

Suitable for indoor & outdoor installations.
Branded, battery-specific instructions included with your install.
Comprehensive kit – includes all labels for common installation requirements.
Shutdown labels – Multi-scenario and product-specific labels with images.
Includes Plaque with all labels required adjacent to the battery, to make the labelling look as professional as the install.
Waterproof safety data sheet – Comes in a magnetic holder to easily attach inside the MSB.
Clear instructions – Guidance on where to place each label for different scenarios.
Engineered in Australia – Designed in-house by our expert engineers.
Great value for money.

Comprehensive battery label kit suitable for indoor & outdoor installation
Kit includes:
- Pro-plaque labelling plaque with all battery adjacent labels
- All additional battery and PV labels for common installation requirements
- Franklin battery specific shutdown instructions
- Safety data sheet in waterproof holder
- QR code to clear instructions on where to place each label for different scenarios