- DTSU666-20 dual channel smart meter and 2 x 100A CT included
- WiNet dongle included
- Cable cover included
- 2 MPPT
- Compatible with SBR stacks SBR064/096/128/160/192/224
- Compatible with SBH stacks SBH200/250/30

- DTSU666-20 dual channel smart meter and 2 x 100A CT included
- WiNet dongle included
- Cable cover included
- 2 MPPT
- Compatible with SBR stacks SBR064/096/128/160/192/224
- Compatible with SBH stacks SBH200/250/30

Accessory kit for Sungrow SBR battery stacks

- Compatible with SHRS, SHRT and SHT Sungrow Hybrid inverters
- Stackable up to 7 modules on 1ph hybrid inverters and 8 modules on 3ph hybrid inverters
- Up to 4 stacks in parallel using SBR combiner
- Requires 1 x SBR accessory kit per stack

Connect up to 4 SBR battery stacks in parallel

600 x 600 x1270mm - 91kg
IP20
Fits up to 6x SIMPO5000 battery modules (30kWh)

600 x 600 x1890mm - 128kg
IP20
Fits up to 10x SIMPO5000 battery modules (50kWh)

P-IS-BATT-500-ES Item ID: 2896

P-IS-WALL-BRACKET
Item ID: 2899

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase includes:
- 1x 63A 1P MCB Main (Grid) Switch
- 1x 63A 1P MCB to wire Backup circuits
- 1x 63A 1P MCB to wire Non-Backup circuits
- 1x 40A 1P MCB to series wire 2x IQ Battery 5P's
- 1x 20A 1P MCB to wire 1x IQ Battery 5P
- 3 x 25A 1P MCB to wire 3x single-phase PV circuits
- 1x 16A* 1P MCB wired to the IQ Gateway
- 1x 6A 2P MCB wired as a System Shutdown (SSD) Switch (substitutes the external SSD that the IQ System Controller comes with)

This kit also comes with 6m of communications cable for Enphase batteries and the Enphase Pro Plaque Label Kit

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch
- Compatible with SBR stacks SBR096/128/160/192/224/256
- Compatible with SBH stacks SBH200/250/300/350/400

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Accessory kit for Sungrow SBH battery stacks

Connect up to 4 SBH battery stacks in parallel

Cable kit for use when installing SIMPO5000 battery modules in a 3rd party cabinet.
Includes:
- 2m positive lead with pre-wired connectors
- 2m negative lead with pre-wired connectors
- 3m communication and earth cable

Connector kit for use when making up own leads for SIMPO5000 battery modules
Includes:
- 1x positive connector
- 1x negative connector

The Communications Kit 2 INT enables wired control communication between the IQ Gateway Metered and the IQ Battery 5P units
SKU: COMMS- KIT- INT-02

Includes CK2 and Legrand Plexo enclosure joining kit for retrofitting to existing Enphase AC Board
Contains 2 x 20A MCBs and 2x 1PH Q-Relays for IQ Batteries
Supports up to 4 Flexphase IQ Batteries

IP55 cabinet
Fits up to 4 x SIMPO5000 battery modules (20kWh max)