- Compatible with 5A CTs
- Suits SGxxCX-P2, SGxxRT, SHxxRT inverters

HM-20
- Suitable for inline connection up to 63A
- Supports connection of external CTs for >63A

Previous SKU: P-IS-DDSU666-H

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch
- Compatible with SBR stacks SBR096/128/160/192/224/256
- Compatible with SBH stacks SBH200/250/300/350/400

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Includes internal CT for 1PH import/export monitoring - external CTs and 3PH meter also available
Optional smart circuits and generator control plugin cards available

100A Automatic generator-backup smart controller also controllable via FranklinWH app

Adds 2 smart circuits to the system controlled via FranklinWH App
2x 50A 240V contacts - max 63A

SEM-SWT-R16-00
- Control loads remotely via the SolarEdge app, on a set timer or excess PV energy smart scheduling
- Measures the energy consumption of the connected appliance - viewable in the SolarEdge app
- Rated to 16A
- Requires inverter Home Network plugin to operate [ENET-HBNP-01]
- Compatible with SolarEdge residential inverters only

- Works with three phase Sigenergy controllers
- Supports up to 2 Sigenergy controller connections (maximum 60kVA total)
- 60kVA smart port connection for backup generator, AC Coupled inverter or smart loads

- Works with single phase Sigenergy controllers
- Supports up to 2 Sigenergy controller connections (maximum 12kVA total)
- 12kVA smart port connection for backup generator, AC Coupled inverter or smart loads

Sigen Sensor TPX-CH

50% Discount
Meter but has been taken out of the box and installed temporarily but it otherwise in working condition
Small scratches on unit

MTR-240-3PC1-D-A-MW
- Compatible with SolarEdge residential inverters only
- Inverter Home Network plugin required for wireless functionality [HNET-HBNP-01]
- Hardwired RS485 comms also possible
- Optional external antenna [SE-ANT-ENET-HB-01] recommended to boost signal strength.

Custom Sigenergy Single Phase Gateway Includes:
- Supports up to 2 x 12kW inverters
- Plastic weatherproof wall mount enclosure: 54P (622H x 448W 161D [mm])
- Prospective fault current: 6kA
- 63A Grid Port MCB (either on-grid or used for the generator while off-grid)
	- 63A AC1 Contactor
	- 1P+N Class 2 Surge Diverter
	- 63A Bypass MCB with auxiliary feedback
- 125A backup load MCB
- 63A smart port / generator MCB
	- 63A AC1 Contactor
- 2 x 63A 6kA MCBs for inverter connections
- Fully pre-wired, labelled and tested to all relevant Australian Standards
	- Installation label kit included