SigenStor BAT 10.0
Total Energy Capacity: 9.04kWh
Usable Energy Capacity: 8.76kWh
Note: CEC approved.

AC Coupled battery - Atmoce 7kWh M-Battery
CEC approved

Requires Franklin aGate Gateway to operate

- Configurable for 1ph or 3ph installations
- Programmable kVA output with options for 1.65/2.5/3.0/3.68/3.84kVA
- Requires IQ system controller for backup solutions
- Enphase CK2 kit can be used for grid connected battery storage without backup
- Wall 

Compatible with SolarEdge Universal 3 Phase Inverter
Recommended to complete SolarEdge Home Hub 3PH Storage training on SolarEdge EDGE Academy before first installation

- Compatible with SHRS, SHRT and SHT Sungrow Hybrid inverters
- Stackable up to 6 modules on 1ph hybrid inverters and 8 modules on 3ph hybrid inverters
- Up to 4 stacks in parallel using SBH combiner
- Requires 1 x SBH accessory kit per stack

sonnenBatterie sBEvo
Ethernet internet connection only per sonnen warranty - Wifi not supported

Kit includes:
- Carton 1 - 3000286 outdoor rated enclosure, inverter and plinth
- Carton 2 - 3000292 accessory kit (energy meter, CTs, MCBs, label kit etc.)
- Carton 3 - 4000630 5kWh battery module 1
- Carton 4 - 4000630 5kWh battery module 2

11452 sonnen LCD programming tool (sold separately) required to commission on 3 phase site

Installer training (required for commissioning): https://sonnen.com.au/become-installer/

Free delivery to metropolitan areas with forklift, or discounted freight for regional areas and metropolitan areas without forklift. Contact us for a tailored freight quote.

Compatible with SolarEdge residential inverters (Home Hub, Genesis & 3 Phase Residential)

Sigenergy Hybrid Inverter 125kW

- 4 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

- 2 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

*Clearance pricing available while stocks last*
Hybrid inverter compatible with SolarEdge Home Battery (non-backup)
Requires SolarEdge optimisers to operate.
Meter and CTs sold separately
Panel level monitoring, Smart Home control and Smart EV Charging features now included as standard.

- 3 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

Kit includes:
- AP1547A-SG-08-FW1 Home Network Plugin
- AS4034-AN1-1 Home Network Antenna
- Compatible with Home Hub, current model Genesis and 3Ø residential inverter range
- SolarEdge Home Network (ENET) cards not compatible with commercial inverters (SE15K and above).

- 3 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

- DTSU666-20 dual channel smart meter and 2 x 100A CT included
- 63A manual changeover switch included
- WiNet dongle included
- Cable cover included
- 4 MPPT
- Compatible with SBR stacks SBR064/096/128/160/192/224
- Compatible with SBH stacks SBH200/250/30

- 4 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

- 2 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

Floor Stand for floor mounting a SolarEdge Home Battery
1 Floor Stand required per battery
Up to 4 batteries can be installed in a row out from a wall

- 3 MPPT
- Maximum 6 battery modules per stack (5 with EVDC charger)
- Supports backup with Sigen Gateway

Reusable tool for SolarEdge battery installations
Set of 4 lifting handles