Designed for 2 x SolarEdge 82.8kW inverters. 


 Secondary network protection & solar distribution board includes the following: 
- Metal enclosure, 1000(H) x 600(W) x 250(D) mm 
- Powder-coated steel with top and bottom gland plates 
- IP 66 rated for outdoor installation 
- 3 point lockable handle 
- 320A MCCB main switch 
- 2 x 148A MCCB inverter circuit breaker 
- 350A N/O contactor 
- 10A internal GPO 
- Spare 3 phase 10A MCB 
- ABB secondary network protection relay (preprogrammed to utility requirements) 
- Pre-labelled with additional labels included for main switchboard 
- All components pre-wired and checked with 2-step QA process 
- Suitable for a maximum fault current of 10kA 
- For higher fault currents, please call ACSW to discuss 
- Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016 


 Available modifications: 
- ABB network protection relay can be swapped for ComApp MainsPro (+$50) 
- Conversion of AC board to slave equivalent without network protection (-$1000) 
- Installation of test links for on-site injection testing (+$100) 
- Installation of 3P+N AC surge diversion (+$250)
- Installation of General Signalling Device (Queensland only) (+$100)

Now supports connection of modules up to 550W/16.5A, see latest data sheet for details

Now supports connection of modules up to 550W/15A, see latest data sheet for details

Now supports connection of 2 modules up to 1200W/15A, SolarEdge waiver with detailed instructions available on request

*Clearance pricing available while stocks last*
Hybrid inverter compatible with SolarEdge Home Battery (non-backup)
Requires SolarEdge optimisers to operate.
Meter and CTs sold separately
Panel level monitoring, Smart Home control and Smart EV Charging features now included as standard.

SE30K-AU00IBNV4
- Requires SolarEdge optimisers to operate
- Wifi capable - antenna sold separately

SE33.3K-AU00IBNV4
- Requires SolarEdge optimisers to operate
- Wifi capable - antenna sold separately

- Requires 2x SESUK-AU00INNN4 Synergy Units to operate as a 50kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 2x SESUK-AU00INNN4 Synergy Units to operate as a 66.6kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 3x SESUK-AU00INNN4 Synergy Units to operate as a 82.8kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

- Requires 3x SESUK-AU00INNN4 Synergy Units to operate as a 100kW inverter
- Requires SolarEdge commercial optimisers to operate 
- Requires SE-ANT-ZB-WIFI-03 external antenna for wireless internet connection

SE-MTR-3Y-400V-A
- Suitable for metering 1, 2 and 3 phase sites
- External CTs required

- Suitable for up to 65A
- Compatible with SolarEdge residential inverters only
- Inverter Home Network plugin required for wireless functionality [HNET-HBNP-01]
- Hardwired RS485 comms also possible
- Optional external antenna [SE-ANT-ENET-HB-01] recommended to boost signal strength.

- Suitable for up to 65A
- Compatible with SolarEdge residential inverters only
- Inverter Home Network plugin required for wireless functionality [HNET-HBNP-01]
- Hardwired RS485 comms also possible
- Optional external antenna [SE-ANT-ENET-HB-01] recommended to boost signal strength.

SE-CTML-0350-070
- Internal cable space: 10mm x 10mm
- External dimensions: 39mm x 26 x 26mm
- Lead length: 2.4m

- Internal cable space: 25mm x 24mm
- External dimensions: 65mm x 46 x 41mm
- Lead length: 1.05m
- Physically larger and higher Amp rated CTs available on request

- Internal cable space: 52mm x 52mm
- External dimensions: 125 x 120 x 29.6mm
- Lead length: 2.4m

- Internal cable space: 102mm x 102mm
- External dimensions: 168mm x 158mm
- Lead length: 2.4m

Compatible with SolarEdge Home Hub inverters
At least one Home Hub inverter required per system for backup functionality
Supports up to 2 additional Genesis or Home Hub inverters in backup
Includes CT for measuring import/export for use with the Home Hub inverters built in energy meter

Alternate SKU: FLD-EURB-YCBL-A-01
Used to parallel 2 or 3 SolarEdge BAT-10K Home Batteries to SolarEdge inverters
Kit includes:
- 1x positive Y-branch connector with MC4s
- 1x negative Y-branch connector with MC4s