Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D [mm]
• Board Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 160A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

Secondary Network Protection and Solar Distribution board includes:
• Metal Enclosure: 800(H) x 600(W) x 250(D) [mm]
• Enclosure Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 200A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 2 100A Inverter circuit breakers
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100->200)
• Install 3P+N AC surge diversion (+$250)

Includes CK2 and Legrand Plexo enclosure joining kit for retrofitting to existing Enphase AC Board
Contains 2 x 20A MCBs and 2x 1PH Q-Relays for IQ Batteries
Supports up to 4 Flexphase IQ Batteries

Custom Sigenergy Single Phase Gateway Includes:
- Supports up to 2 x 12kW inverters
- Plastic weatherproof wall mount enclosure: 54P (622H x 448W 161D [mm])
- Prospective fault current: 6kA
- 63A Grid Port MCB (either on-grid or used for the generator while off-grid)
	- 63A AC1 Contactor
	- 1P+N Class 2 Surge Diverter
	- 63A Bypass MCB with auxiliary feedback
- 125A backup load MCB
- 63A smart port / generator MCB
	- 63A AC1 Contactor
- 2 x 63A 6kA MCBs for inverter connections
- Fully pre-wired, labelled and tested to all relevant Australian Standards
	- Installation label kit included

This switchboard houses an MCCB with earth and neutral bars, in a GRP (IP66, fire & UV resistant) lockable enclosure.
It can be used as an inverter adjacent isolator (comes with DC system label kit), or even just when a cable size change is required.
It has an internal escutcheon and a fused DIN rail for monitoring equipment, or a GSD for QLD installs, can be added.
Compliant to all relevant standards including AS 61439 with routine verification & QA.