Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Includes accessories below
- WiNet-S2 module
- DTSU666-20 smart meter and 6 x CT
- 63A manual changeover switch

Accessory kit for Sungrow SBH battery stacks

Connect up to 4 SBH battery stacks in parallel

Secondary Network Protection and Solar Distribution board includes:
• Metal Enclosure: 800(H) x 600(W) x 250(D) [mm]
• Enclosure Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 200A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 2 100A Inverter circuit breakers
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100->200)
• Install 3P+N AC surge diversion (+$250)

Cable kit for use when installing SIMPO5000 battery modules in a 3rd party cabinet.
Includes:
- 2m positive lead with pre-wired connectors
- 2m negative lead with pre-wired connectors
- 3m communication and earth cable

New inverter never installed with minor transport damage to heatsink. In carton with all parts and documents present.
1 unit available in Cairns
Requires SolarEdge optimisers to operate.

This model contains R290 refrigerant to comply with Victorian standards.

Connector kit for use when making up own leads for SIMPO5000 battery modules
Includes:
- 1x positive connector
- 1x negative connector

Includes internal CT for 1PH import/export monitoring - external CTs and 3PH meter also available
Optional smart circuits and generator control plugin cards available

The Communications Kit 2 INT enables wired control communication between the IQ Gateway Metered and the IQ Battery 5P units
SKU: COMMS- KIT- INT-02

100A Automatic generator-backup smart controller also controllable via FranklinWH app

Adds 2 smart circuits to the system controlled via FranklinWH App
2x 50A 240V contacts - max 63A

Includes CK2 and Legrand Plexo enclosure joining kit for retrofitting to existing Enphase AC Board
Contains 2 x 20A MCBs and 2x 1PH Q-Relays for IQ Batteries
Supports up to 4 Flexphase IQ Batteries

CT100-16-05