SigenStor BAT 10.0
Total Energy Capacity: 9.04kWh
Usable Energy Capacity: 8.76kWh
Note: CEC approved.

AC Coupled battery - Atmoce 7kWh M-Battery
CEC approved

Requires Franklin aGate Gateway to operate

- Configurable for 1ph or 3ph installations
- Programmable kVA output with options for 1.65/2.5/3.0/3.68/3.84kVA
- Requires IQ system controller for backup solutions
- Enphase CK2 kit can be used for grid connected battery storage without backup
- Wall 

Compatible with SolarEdge Universal 3 Phase Inverter
Recommended to complete SolarEdge Home Hub 3PH Storage training on SolarEdge EDGE Academy before first installation

AI-W5.1-B-ESS
5kWh battery module for Deye All-In-One

- Compatible with SHRS, SHRT and SHT Sungrow Hybrid inverters
- Stackable up to 6 modules on 1ph hybrid inverters and 8 modules on 3ph hybrid inverters
- Up to 4 stacks in parallel using SBH combiner
- Requires 1 x SBH accessory kit per stack

sonnenBatterie sBEvo
Ethernet internet connection only per sonnen warranty - Wifi not supported

Kit includes:
- Carton 1 - 3000286 outdoor rated enclosure, inverter and plinth
- Carton 2 - 3000292 accessory kit (energy meter, CTs, MCBs, label kit etc.)
- Carton 3 - 4000630 5kWh battery module 1
- Carton 4 - 4000630 5kWh battery module 2

11452 sonnen LCD programming tool (sold separately) required to commission on 3 phase site

Installer training (required for commissioning): https://sonnen.com.au/become-installer/

Free delivery to metropolitan areas with forklift, or discounted freight for regional areas and metropolitan areas without forklift. Contact us for a tailored freight quote.

- Works with single phase Sigenergy controllers
- Supports up to 2 Sigenergy controller connections (maximum 12kVA total)
- 12kVA smart port connection for backup generator, AC Coupled inverter or smart loads
- Rear entry knockouts included
- Cable cover included for bottom entry

Compatible with SolarEdge residential inverters (Home Hub, Genesis & 3 Phase Residential)

Requires Franklin aGate Gateway to operate

Floor Stand for floor mounting a SolarEdge Home Battery
1 Floor Stand required per battery
Up to 4 batteries can be installed in a row out from a wall

Reusable tool for SolarEdge battery installations
Set of 4 lifting handles

Alternate SKU: FLD-EURB-YCBL-A-01
Used to parallel 2 or 3 SolarEdge BAT-10K Home Batteries to SolarEdge inverters
Kit includes:
- 1x positive Y-branch connector with MC4s
- 1x negative Y-branch connector with MC4s

Accessory kit for Sungrow SBR battery stacks

- Compatible with SHRS, SHRT and SHT Sungrow Hybrid inverters
- Stackable up to 7 modules on 1ph hybrid inverters and 8 modules on 3ph hybrid inverters
- Up to 4 stacks in parallel using SBR combiner
- Requires 1 x SBR accessory kit per stack

Connect up to 4 SBR battery stacks in parallel

600 x 600 x1270mm - 91kg
IP20
Fits up to 6x SIMPO5000 battery modules (30kWh)

Enables wifi and ethernet internet connections for ZYC SIMPO5000 Systems
Strongly recommended for use with every install, allows remote monitoring for installers and remote diagnostics and support from ZYC