IQBATTERY-5P-1P-ROW

Reach out to your account manager to place your order

The Enphase mobile connect is a USB plug-and-play device that's provides 4G internet connect to the system Envoy for an Enphase system that 96 microinverters or less. This device comes with a 5 year pre-paid data plan included. This device is compatible with the following Envoy/System Controllers:
- ENV-S-WM-230
- ENV-S-WB-230,
- NV-S-EM-230
- SC100G-M230ROW
- SC100G-M230INT

SigenStor BAT 6.0
Total Energy Capacity: 6.02kWh
Usable Energy Capacity: 5.84kWh
CEC approved

600 x 600 x1270mm - 91kg
IP20
Fits up to 6x SIMPO5000 battery modules (30kWh)

Enables wifi and ethernet internet connections for ZYC SIMPO5000 Systems
Strongly recommended for use with every install, allows remote monitoring for installers and remote diagnostics and support from ZYC

600 x 600 x1890mm - 128kg
IP20
Fits up to 10x SIMPO5000 battery modules (50kWh)

P-IS-BACKUP-3P (02406150)
Item ID: 2898

Previous SKU: P-IS-DDSU666-H

An AC Isolator, ready to install directly onto racking. Comes with glands and bootlaces for installation.

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D
• IP66
• Switchgear rated to 100A
• MainsPro Interface Protection Relay, pre-programmed to DNSP settings
• Fault rated to 33.4kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2025, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase includes:
- 1x 63A 1P MCB Main (Grid) Switch
- 1x 63A 1P MCB to wire Backup circuits
- 1x 63A 1P MCB to wire Non-Backup circuits
- 1x 40A 1P MCB to series wire 2x IQ Battery 5P's
- 1x 20A 1P MCB to wire 1x IQ Battery 5P
- 3 x 25A 1P MCB to wire 3x single-phase PV circuits
- 1x 16A* 1P MCB wired to the IQ Gateway
- 1x 6A 2P MCB wired as a System Shutdown (SSD) Switch (substitutes the external SSD that the IQ System Controller comes with)

This kit also comes with 6m of communications cable for Enphase batteries and the Enphase Pro Plaque Label Kit

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D [mm]
• Board Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 160A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)