Products | AC Solar Warehouse AU

[ZAPPI-2H22UW-T] Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered White

Myenergi Zappi smart EV charger 7kW22kW multiphase - Untethered White 2.webp

Recent price reduction

EV Chargers

Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered White

Charging Cable Not Included
Untethered with Type 2 Socket

Add to Cart

EV Chargers

Zappi Glo 7kW EV Charger Tethered with 6.5m lead (black)

Add to Cart

iStore

iStore 180L heat pump (R290 refrigerant)

Please note that this item is only being drop-shipped from iStore from either MEL, BNE, SYD, ADL, PER.

These items are very large and bulky. Logistics to residential addresses needs to be carefully considered

Add to Cart

Heat Pumps

iStore 270L heat pump (R290 refrigerant)

This model contains R290 refrigerant to comply with Victorian standards.

Add to Cart

iStore quickie kit 15mm

Includes:
- PTR valve
- Solar Tempering Valve
- 4 Way Tee
- Isolation and Pressure reduction valve
- ECV

Add to Cart

Accessories

Under Panel AC Isolator Package (2 x 2 Hole Glands)

An AC Isolator, ready to install directly onto racking. Comes with glands and bootlaces for installation.

Add to Cart

AC Boards Classic

AC Board Classic - 100A Single Inverter

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D
• IP66
• Switchgear rated to 100A
• MainsPro Interface Protection Relay, pre-programmed to DNSP settings
• Fault rated to 33.4kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2025, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

Add to Cart

AC Boards Enphase

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase includes:

- 1x 63A 1P MCB Main (Grid) Switch

- 1x 63A 1P MCB to wire Backup circuits

- 1x 63A 1P MCB to wire Non-Backup circuits

- 1x 40A 1P MCB to series wire 2x IQ Battery 5P's

- 1x 20A 1P MCB to wire 1x IQ Battery 5P

- 3 x 25A 1P MCB to wire 3x single-phase PV circuits

- 1x 16A* 1P MCB wired to the IQ Gateway

- 1x 6A 2P MCB wired as a System Shutdown (SSD) Switch (substitutes the external SSD that the IQ System Controller comes with)

- Enphase battery - Pro plaque label kit

- 6m of communications cable for Enphase batteries

Add to Cart

AC Boards Classic

AC Board Classic - 160A Single Inverter

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800H x 600W x 250D [mm]
• Board Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 160A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

Add to Cart

AC Boards Classic

AC Board Classic - 200A Dual Inverter (2 x 100A)

Secondary Network Protection and Solar Distribution board includes:
• Metal Enclosure: 800(H) x 600(W) x 250(D) [mm]
• Enclosure Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 200A
• ABB Grid Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 2 100A Inverter circuit breakers
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Swap ABB Network Protection Relay for ComApp MainsPro (+$50)
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100->200)
• Install 3P+N AC surge diversion (+$250)

Add to Cart

[ACB-CK2R-2B] AC Board - Single Phase Enphase CK2 IQ Battery Retrofit (2 x Circuits)

Pre-Order

Residential AC Boards (Enphase)

AC Board - Single Phase Enphase CK2 IQ Battery Retrofit (2 x Circuits)

Includes CK2 and Legrand Plexo enclosure joining kit for retrofitting to existing Enphase AC Board
Contains 2 x 20A MCBs and 2x 1PH Q-Relays for IQ Batteries
Supports up to 4 Flexphase IQ Batteries

Add to Cart

SolarEdge

SolarEdge Warranty Extension - Universal 3 Phase Inverter < 15kW - 25 years

Add to Cart

AC Board - SolarEdge Residential DC Combiner Box

DC combiner for residential SolarEdge PV Strings and Batteries
4 fused inputs for up to 4 SolarEdge optimised strings or 10kWh Home Batteries
300 x 230 x 100mm IP65 enclosure
Pre-labelled & wall mounting kit included

Add to Cart

Enphase

Enphase IQ8HC microinverter (380W)

IQ8HC-72-M-INT

Add to Cart

[ACB-PB] AC Board - Polyphase Backup Board

Commercial AC Boards

AC Board - Polyphase Backup Board

Designed for 3 phase connections and single phase inverters. While off-grid the board will combine all 3 phases into one so the system can act as a 'single phase' system, feeding loads across the original 3 phases.

When the grid comes back up, the board will first un-combine the 3 phases, then reconnect each phase, as a 3 phase system, back to the grid.

The board has adjustable time delays, plenty of wiring space, high quality components and a mechanical interlock to avoid phase faults.

Add to Cart

Atmoce Adjustable Battery Levelling Feet Kit (Pack of 4)

Used when floor mounting the Atmoce M-ELV Battery
Kit includes 4 feet, 1 kit required per battery being floor mounted

Add to Cart

[ZAPPI-2H22UB-T] Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered Black

Recent price reduction

Myenergi

Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered Black

Charging Cable Not Included
Untethered with Type 2 Socket

Add to Cart

Engineering Services

Schematic Diagram for Solar System >30kVA to 200kVA

Complete electrical schematic detailing equipment specifications, cable sizing, protective device ratings, network interface/export control architecture, and summary schedules for fault levels and voltage rise calculations.

Add to Cart

Engineering Services

RPEQ Compliance Report (CR) - Energy Queensland systems over 30kVA up to 200kVA

Post-commissioning RPEQ-certified engineering report validating that the as-built installation, commissioned inverter parameters, and grid protection settings strictly comply with the approved design and Energy Queensland connection agreement.

Add to Cart

Engineering Services

Energy Queensland (EQ) Grid Connection & RPEQ Compliance Package

The Energy Queensland (EQ) Grid Connection & RPEQ Compliance Package includes the SLD, DCR and CR along with all correspondence and fees associated with Energy Queensland for the Grid Connection application.

It also includes the PQ data analysis service (if required).

Power Quality Meter Rental is also available and sold separately.

Add to Cart

AC Boards Classic

AC Board Classic - 200A Single Inverter

Secondary Network Protection and Solar Distribution board includes:
• Board Dimensions: 800(H) x 600(W) x 250(D) [mm]
• Board Colour: RAL 7035
• IP66
• Powder-coated steel with top and bottom gland plates
• Switchgear rated to 200A
• ComAp MainsPro Interface Protection Relay, pre-programmed to DNSP settings
• Fault rated to 18kA
• Fault current applies to entire assembly, complying with AS/NZS 61439.1:10
• For higher fault currents, please call ACSW to discuss
• 3-Point Locking System
• Pre-labelled with additional labels included for MSB
• Pre-wired and factory tested according to AS/NZS 61439.1: Clause 11
• Compliant to AS/NZS 3008.1.1:2017, AS/NZS 3000:2018, AS/NZS 5033:2021, AS/NZS 4777.1:2016, AS/NZS 61439.2:2016

- Available Modifications -
• Install test links for injection testing (+$100)
• Install Generation Signalling Device (Queensland only) (+$100)
• Install 3P+N AC surge diversion (+$250)

Add to Cart

Guest

Login

My Cart

My Wishlist

Filters

Categories

Categories

Shop

All Products

Categories

Tags

Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered White

Zappi Glo 7kW EV Charger Tethered with 6.5m lead (black)

iStore 180L heat pump (R290 refrigerant)

iStore 270L heat pump (R290 refrigerant)

iStore quickie kit 15mm

Under Panel AC Isolator Package (2 x 2 Hole Glands)

AC Board Classic - 100A Single Inverter

AC Board - Enphase IQ System Controller - Pre-Wired Single Phase

AC Board Classic - 160A Single Inverter

AC Board Classic - 200A Dual Inverter (2 x 100A)

AC Board - Single Phase Enphase CK2 IQ Battery Retrofit (2 x Circuits)

SolarEdge Warranty Extension - Universal 3 Phase Inverter < 15kW - 25 years

AC Board - SolarEdge Residential DC Combiner Box

Enphase IQ8HC microinverter (380W)

AC Board - Polyphase Backup Board

Atmoce Adjustable Battery Levelling Feet Kit (Pack of 4)

Myenergi Zappi smart EV charger 7kW/22kW multiphase - Untethered Black

Schematic Diagram for Solar System >30kVA to 200kVA

RPEQ Compliance Report (CR) - Energy Queensland systems over 30kVA up to 200kVA

Energy Queensland (EQ) Grid Connection & RPEQ Compliance Package

AC Board Classic - 200A Single Inverter

Sort By

Filters

Categories

Categories

Shop

All Products

Categories

Tags

Showing 546 of 564 results

Sort By